Author Topic: I need more help.  (Read 1173 times)

0 Members and 1 Guest are viewing this topic.

Offline Funk Pavey Airsoft

  • Gunslinger
  • **
  • Posts: 131
  • Now recruiting, P.M. or E-Mail us if interested.
    • The Funk Pavey Airsoft YouTube Channel
I need more help.
« on: May 07, 2012, 05:07:02 PM »
My M4 will not close.  As in when you open to get to the gearbox.what could be the problem. (sorry I can't really get into any more detail)
We might as well be ANA, Airsoft n00bs Anonymous. Be sure to check out our YouTube channel: http://www.youtube.com/user/FunkPaveyAirsoft

Offline primer

  • Soldier
  • *
  • Posts: 928
  • Budget-softer
    • Good Guyz
Re: I need more help.
« Reply #1 on: May 07, 2012, 05:30:18 PM »
You cant close the gearbox? or you cant make it fit in the lower receiver or what... That helps no one.
Leader of Team GoodGuyz a Youtube based airsoft team, That strives to capture the best airsoft games out there.
Youtube.com/user/teamgoodguyz

Tokyo Mauri P90 Custom
G&G Gr-16R4
Tokyo Mauri 1911 Custom
Dboys AK74

Offline Mongoose

  • Mercenary
  • *
  • Posts: 556
    • Renegade Bloc
Re: I need more help.
« Reply #2 on: May 07, 2012, 05:41:30 PM »
Are you talking about the receiver? As In the upper will not close against the lower? If so, your spring is most likely partially compressed. Fire a few shots In semi to reset the spring and then try.



Offline Funk Pavey Airsoft

  • Gunslinger
  • **
  • Posts: 131
  • Now recruiting, P.M. or E-Mail us if interested.
    • The Funk Pavey Airsoft YouTube Channel
Re: I need more help.
« Reply #3 on: May 07, 2012, 06:08:58 PM »
Are you talking about the receiver? As In the upper will not close against the lower? If so, your spring is most likely partially compressed. Fire a few shots In semi to reset the spring and then try.
it's a ICs M4 so its a two part, so how am i supposed to shoot it?
We might as well be ANA, Airsoft n00bs Anonymous. Be sure to check out our YouTube channel: http://www.youtube.com/user/FunkPaveyAirsoft

Offline Mongoose

  • Mercenary
  • *
  • Posts: 556
    • Renegade Bloc
Re: I need more help.
« Reply #4 on: May 07, 2012, 06:11:19 PM »
Since you can't seem to dercribe what's going on, a few pictures would help.



Offline Funk Pavey Airsoft

  • Gunslinger
  • **
  • Posts: 131
  • Now recruiting, P.M. or E-Mail us if interested.
    • The Funk Pavey Airsoft YouTube Channel
Re: I need more help.
« Reply #5 on: May 07, 2012, 06:54:14 PM »
like i always say sorry for the low quality pictures
We might as well be ANA, Airsoft n00bs Anonymous. Be sure to check out our YouTube channel: http://www.youtube.com/user/FunkPaveyAirsoft

Offline Funk Pavey Airsoft

  • Gunslinger
  • **
  • Posts: 131
  • Now recruiting, P.M. or E-Mail us if interested.
    • The Funk Pavey Airsoft YouTube Channel
Re: I need more help.
« Reply #6 on: May 07, 2012, 06:54:55 PM »
part 2
We might as well be ANA, Airsoft n00bs Anonymous. Be sure to check out our YouTube channel: http://www.youtube.com/user/FunkPaveyAirsoft

Offline primer

  • Soldier
  • *
  • Posts: 928
  • Budget-softer
    • Good Guyz
Re: I need more help.
« Reply #7 on: May 07, 2012, 06:56:43 PM »
If the gearbox will not close fully, Check and make sure that there is NOTHING wrong or holding it up(IE gear not in properly). Then find a clamp and clamp it (You can get an okay one at menards for 5$) and slowly tighten the screws. (It tightens it without putting to much strain on the screws.) I still cannot tell the problem pics please. And please Dont let them be the same quality as your last post. lol
EDIT with pics again try to tighten the gearbox im sure that Mongoose or Chavez can help you beyond what i can lol
« Last Edit: May 07, 2012, 06:59:47 PM by primer »
Leader of Team GoodGuyz a Youtube based airsoft team, That strives to capture the best airsoft games out there.
Youtube.com/user/teamgoodguyz

Tokyo Mauri P90 Custom
G&G Gr-16R4
Tokyo Mauri 1911 Custom
Dboys AK74

Offline Mongoose

  • Mercenary
  • *
  • Posts: 556
    • Renegade Bloc
Re: I need more help.
« Reply #8 on: May 07, 2012, 07:00:56 PM »
Looks like there is a pin between the two receivers. That pin should be removed for you to put the receivers together.



Offline Funk Pavey Airsoft

  • Gunslinger
  • **
  • Posts: 131
  • Now recruiting, P.M. or E-Mail us if interested.
    • The Funk Pavey Airsoft YouTube Channel
Re: I need more help.
« Reply #9 on: May 07, 2012, 07:02:16 PM »
@Mongoose i just put that there so i wouldn't lose it
We might as well be ANA, Airsoft n00bs Anonymous. Be sure to check out our YouTube channel: http://www.youtube.com/user/FunkPaveyAirsoft

Offline primer

  • Soldier
  • *
  • Posts: 928
  • Budget-softer
    • Good Guyz
Re: I need more help.
« Reply #10 on: May 07, 2012, 07:05:10 PM »
@Mongoose i just put that there so i wouldn't lose it
Can you check to see what might be holding it up? Like is it caught on any part? you cannot really tell from the pic.
Leader of Team GoodGuyz a Youtube based airsoft team, That strives to capture the best airsoft games out there.
Youtube.com/user/teamgoodguyz

Tokyo Mauri P90 Custom
G&G Gr-16R4
Tokyo Mauri 1911 Custom
Dboys AK74

Offline Funk Pavey Airsoft

  • Gunslinger
  • **
  • Posts: 131
  • Now recruiting, P.M. or E-Mail us if interested.
    • The Funk Pavey Airsoft YouTube Channel
Re: I need more help.
« Reply #11 on: May 07, 2012, 07:07:56 PM »
any picture requests?
We might as well be ANA, Airsoft n00bs Anonymous. Be sure to check out our YouTube channel: http://www.youtube.com/user/FunkPaveyAirsoft

Offline Funk Pavey Airsoft

  • Gunslinger
  • **
  • Posts: 131
  • Now recruiting, P.M. or E-Mail us if interested.
    • The Funk Pavey Airsoft YouTube Channel
Re: I need more help.
« Reply #12 on: May 07, 2012, 07:27:21 PM »
i cant tell if its caught on anything
We might as well be ANA, Airsoft n00bs Anonymous. Be sure to check out our YouTube channel: http://www.youtube.com/user/FunkPaveyAirsoft

Offline Funk Pavey Airsoft

  • Gunslinger
  • **
  • Posts: 131
  • Now recruiting, P.M. or E-Mail us if interested.
    • The Funk Pavey Airsoft YouTube Channel
Re: I need more help.
« Reply #13 on: May 08, 2012, 05:57:14 PM »
Thanks guys, I fixed it. all that was wrong was a little tension on the spring so thanks for the help
We might as well be ANA, Airsoft n00bs Anonymous. Be sure to check out our YouTube channel: http://www.youtube.com/user/FunkPaveyAirsoft